Identificarse Registrar

Ingresar

Usuario o Correo
Password *
Captcha *
Recordarme

Crear una cuenta

Los campos marcados con un asterisco (*) son obligatorios.
Nombre
Usuario o Correo
Password *
Verificar password *
Email *
Verificar email *
Carrito vacío
  • Banner-Marcas distribuidas-2
WS-13460_2
WS-13460_3
WS-13460_4
WS-13460_5
WS-13460_6
WS-13460_7
WS-13460_8
WS-13460_01

$ 179.555,53

Cantidad disponible: 2

Shield GSM/GPRS/ GNSS/Bluetooth para Raspberry Pi

Ref: WS-13460
Tarjeta GSM/GPRS/GNSS/Bluetooth HAT para Raspberry Pi.
Descripción:

Tarjeta GSM/GPRS/GNSS/Bluetooth HAT para Raspberry Pi. Permita a la Rapberry Pi fácilmente hacer una llamada telefónica, enviar mensajes, conectarse inalámbricamente al internet, GPS, transferir datos via Bluetooth, etc.

Características:

  • Voltaje de operación: 5V
  • Temperatura de operación: - 40°C ~ 85°C
  • Temperatura de almacenamiento: - 45°C ~ 90°C
  • Dimensiones: 30.2mm x 65mm
  • Compatible con Raspberry Pi 2B/3B/3B+/Zero/Zero W
  • Soporta SMS, llamada telefónica, GPRS, DTMF, HTTP, FTP, MMS, email, etc.
  • Soporta GPS, COMPASS, Glonass, LBS base station positioning, omni-positioning
  • Bluetooth 3.0, soporta transferencia de datos a través de Bluetooth
  • Conversor USB a UART CP2102 para UART debugging
  • 6x LEDs que indicant el estado de trabajo del módulo
  • Ranura SIM para SIM card de 1.8V/3V
  • RTC con battery holder
  • Auto detección de Baudrate (1200bps ~115200bps)
  • Control via commandos AT (3GPP TS 27.007, 27.005, y SIMCOM enhanced AT Commands)
  • Soporta SIM application toolkit: GSM 11.14 Release 99
  • Viene con manual (ejemplos para Raspberry Pi/Arduino/STM32)
 

Enlaces de interés:

Manual de usuario

Información adicional  

 

 


  1. SIM868 module
  2. ZMM5V1: regulator diode
  3. SMF05C: TVS diode
  4. CP2102: USB TO UART converter
  5. MP1482: power chip
  6. NDC7002N: voltage level translator
  7. GPS status indicator
  8. NET indicator:
    • flashes fast when the module starts up
    • flashes slowly after GSM register succeed
  9. STA module working status indicator
  10. SIM868 UART Tx/Rx indicator
  11. Power indicator
  12. SIM868 control button: press the button and hold for 1s, to startup/shutdown the SIM868
  13. Raspberry Pi GPIO connector
  14. SIM card slot
  15. USB TO UART interface
  16. 3.5mm earphone/mic jack
  17. GNSS antenna connector
  18. Bluetooth antenna connector
  19. GSM antenna connector
  20. CR1220 battery holder: for RTC backup battery
  21. UART selection switch
    • A: control the SIM868 through USB TO UART
    • B: control the SIM868 through Raspberry Pi
    • C: access Raspberry Pi through USB TO UART

 

 

Enlace al fabricante:


Palabras claves: GSM, GPS, GPRS, GNSS, Bluetooth, HAT, shield